Applications for LED Modules

What is the applications for LED Modules

LED modules can be used for any kind of lighting application. Typically sign guys use it for backlite signs and channel letters. www.ecosung.com carry a wide variety of modules to match your application and budget, also great for cove lighting, cabinet lighting or any other application where modular LED lighting is needed.

 What depth of return do I need for my LED Modules

We recommend a depth above 5" to 6" for the LED Modules to properly diffuse when backlighting channel letters, but with our new wide angle LED module, you can make the return as low as 3", in this situation, you need layout the modules more closer (4" per row)

What power supply do I need to run my LED Modules

All of modules use 12v DC as input power. It is the most popular input for LED modules on the market. In order to determine what power supply you would need you first need to figure out what type of DC Voltage the modules operate on and then you must determine the total power of modules that will be powered, wattage are different from modules even same size but different color. After figuring the total wattage of the modules being powered add an additional 15% margin on top of that and the final value is the total power you need for your LED project.

How do I mount your LED Modules

All of our LED modules come with intergrated 3M VHB tape, it is strong enough for small channel letters or cabinet signs. When the letters are bigger than 3 feet, you may need to use screw fastening.

 Can I cut the wire in between each Module

Yes, all of our LED Modules can be cut at any point in the lead wires between each module, after cutting, connect red wire to positive and blue to negative.