44-key infrared rgb led controller
This product uses the infrared remote control, one-touch function control can achieve a gradual transition, flash and other dynamic functions, with a broken memory, without frequent set speed adjustable brightness. This product is suitable for a variety of LED lights and module control.
Ⅰ.The related parameters:
Input/output voltage: DC12V
remote distance: MAX 10 meters
Maximum output current : 2A*3
largest single load: 72W
Ⅱ.Instructions:
1. Output socket of the light bar plugs into the controller to ensure that the public side of the lamp (module) (total positive V + or total Yin V-) and the public side of the controller corresponds to connection. (Depending on the light bar requirements to change the output wiring).
2. DC12V power into the controller DC, using the remote control to manipulate to allow the controller to work as needed.
3. Install the controller to remote control receiver tube installed in the location without obstructions and to avoid remote control failure.
Ⅲ. Function mode list:
Brightness l (A total of 58) |
Brightness drop (A total of 58) |
Pause / Run |
On / off |
Static red |
Static green |
Static blue |
Static white |
Static orange |
Static light green |
Static dark blue |
Milky |
Static deep yellow |
Static blue |
Static blue-violet |
Pink and white |
Static yellow |
Static light blue |
Static purple |
Green and white |
Static light yellow |
Static sky blue |
Static brown |
Blue and white |
Plus red light |
Plus green light |
Plus blue light |
Accelerate |
Less red light |
Less green light |
Less blue light |
Slow down |
Custom Colors (1) |
Custom Colors(2) |
Custom Colors(3) |
Automatically change color |
Custom Colors (4) |
Custom Colors(5) |
Custom Colors(6) |
Strobe |
Three-color transitions |
Rainbow jump change |
Three-color gradient |
Rainbow Gradient |
Safety information
1. The input voltage is 12V DC.
2. The product warranty for one year. Damage to the product due to incorrect operation, the warranty does not cover